AIRIX ARMOR, TNVC & Night Goggles, Inc. Limited Lifetime Warranty
***ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDERDUE TO HOUSINGS, CURRENT LEAD TIME ON THE TNV/RNVG Filmed GP and Un-Filmed WP is 6-10 Weeks***
The RNVG is designed as the most rugged night vision goggle available. While most NVGs are built with molded polymer housings, the RNVG features a 7075 aluminum chassis for unsurpassed rigidity and structural strength. All articulation points have been beefed up to increase impact resistance, giving users one tough goggle.
Designed and machined at AB NightVision, and finished / assembled at TNVC, the Ruggedized Night Vision Goggle is ready to face the toughest customers and harshest environments!
Traditionally, the weakest point in a night vision goggle is the joint between the optic pods and the bridge. This point accounts for the majority of catastrophic breakage when a NVG is dropped or hit. Part of this reason is that these joints are either polymer on polymer or metal on polymer interfaces. While there are some seriously strong impact-resistant polymers out there, it is hard to beat aluminum for strength-to-weight ratios in this application.
Both the optic pods and bridge in the RNVG are machined from solid billet 7075 (a material that is 36% stronger than most common steel), to give end users the strongest NVG on the market (not to mention a little piece of mind). Careful design and advanced machining keep the weight down to 20 oz. with a battery installed.
The RNVG eliminates exposed wires, something commonly found in ANVIS-style night vision goggles. As the optic pods traverse during interpupilary adjustment, they ride across an electrical contact strip. This provides much increased weather/element resistance and mitigates a traditional failure point. Interpupilary adjustment is accomplished by turning dual knobs on either side of the bridge; the same as any traditional ANVIS goggle.
The RNVG utilizes a single CR123 battery, and comes with an auxiliary power connector for use with ANVIS-style auxiliary battery packs such as the USGI Low Profile Battery Pack or AB Night Vision Ground Optimized Battery Pack.
TNVC assembles the RNVG with milspec PVS-14 eyepieces and objective lenses. These battle proven, familiar parts add to the considerable strength of the system. Controls are simple. If you are familiar with a PVS-14, you will be right at home with the RNVG. A standard PVS-14 power knob is located on the front of the bridge. It features on/off controls, and active IR illuminator mode. Just like a 14, simply pull the knob out and twist it all the way to turn on the built-in infrared illuminator. The RNVG features a dovetail mount interface.
AIRIX ARMOR, TNVC & Night Goggles, Inc. Limited Lifetime Warranty
TNVC, Inc. and Night Goggles, Inc. warrants this product for the lifetime of the product and guarantees this product to be free from manufacturing defects in material and workmanship under normal use, and transferable by the owner assuming that the product otherwise still falls within the scope of this warranty. In the event that a defect covered by this warranty occurs TNVC, Inc. or Night Goggles, Inc., at its discretion, will either repair or replace the product. Such action on the part of TNVC, Inc. or Night Goggles, Inc. shall be the full extent of the companys liability, and the customers sole and exclusive remedy. This warranty applies to all TNV and NGI-branded Night Vision Device housing systems, and furthermore warrants that all Image Intensifier Tubes will be free from manufacturing defects in material and workmanship under normal use for a period of 10 years after the original date of purchase. This warranty does not cover:
TNVC, Inc. shall not be responsible for any defects or damage that in the companys opinion, resulted from the mishandling, abuse, misuse, improper storage, or improper operation, including use in conjunction with equipment which is electrically or mechanically incompatible with or of inferior quality to the product, as well as failure to maintain the environmental conditions specified by the manufacturer. This includes using rechargeable batteries, storing the product with batteries installed, or battery compartment corrosion due to faulty battery. Warranty claims falling outside of the scope of these written warranty terms may incur repair, labor, and shipping fees charged to the customer.
Customer is hereby notified that operation of the equipment during daylight or under excessive light conditions may permanently damage the image intensifier tube. While all TNV and NGI systems are auto-gated, they are not able to withstand exposure to constant light including, but not limited to, light sources, weapon sights, laser radiation. Auto-gated Image Intensifier Tubes are designed to stand up to nighttime battlefield light conditions, but prolonged exposure to any light source will still cause damage.
No other warranties except for this one apply to this product, including, but not limited to written, oral, statutory, expressed or implied, including any implied warranty or merchantability or fitness for particular purpose, shall apply to this product.
Export of Night Vision Equipment or related accessories (such as manuals) is strictly regulated by the US Department of State in accordance with the guidelines of the International Traffic in Arms Regulations (ITAR). It is a major crime to ship or carry US manufactured night vision devices outside the borders of the United States, punishable by fines and prison sentences. Ignorance of these regulations will not hold up in court. By purchasing night vision equipment from TNVC, you attest that you will not attempt to export or carry this night vision equipment outside the borders of the United States. Also, it illegal to allow a non-US Citizen to look through US Gen3 Night Vision Devices, even on US soil. Again, this is a crime punishable by fines and prison sentences.
|Manufacturer||AB NightVision Inc. (Assembled by TNVC)|
|Dimensions||4.7?(L) x 4.2?(W) x 2.8?(H)|
|Weight||20.1 oz. w/ Battery|
|Finish||Anodized Matte Black (Coyote or FDE Cerekote)|
|Power||One (1) CR123 Battery, Optional External Battery Pack|
|Battery Life (CR123)||Approx. 30 Hours at Room Temp. w/ Standard CR123|
|Warranty||Lifetime System Warranty & 10 Year Warranty on image intensifiers|
|Generation||U.S. Gen3 L3Harris MIL-SPEC Green Thin-Filmed or Unfilmed White Phosphor|
|Intensifier Tubes||L3Harris MX10160 (x2)|
|Resolution||64 lp/mm (Typical)|
|Film||Thin Film or Unfilmed|
|Gain||Automatic Brightness Control|
|Ocular Lens||+2 to -6|
|Focus||9.8? to Infinity|
|Included||Tube/System Factory Data Sheets, Soft Carry Case, Daylight Filter Covers (x2)|